 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 7 Pin SIL 4 Tap TTL Compatible Active Delay Lines TAP DELAYS 5% or 2 nS TOTAL DELAYS 5% or 2 nS Part Number TAP DELAYS 5% or 2 nS TOTAL DELAYS 5% or 2 nS Part Number 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 12.0 0.5 1 1 1.5 *3 0.5 *8 1.0 *9 *12 *15 *18 28 32 36 40 48 EPA1190-4 EPA1190-6 EPA1190-9 EPA1190-12 EPA1190-15 EPA1190-18 EPA1190-28 EPA1190-32 EPA1190-36 EPA1190-40 EPA1190-48 15 20 25 30 35 40 50 60 70 80 90 100 60 80 100 120 140 160 200 240 280 320 360 400 EPA1190-60 EPA1190-80 EPA1190-100 EPA1190-120 EPA1190-140 EPA1190-160 EPA1190-200 EPA1190-240 EPA1190-280 EPA1190-320 EPA1190-360 EPA1190-400 Whichever is greater. Delay times referenced from input to leading edges at 25C, 5.0V, with no load. *Delay times referenced from 1st tap 1st tap is the inherent delay: approx. 7 nS DC Electrical Characteristics Parameter Test Conditions VOH VOL VIK IIH VCC = min. VIL = max. I OH = max VCC = min. VIH = min. I OL= max VCC = min. II = IIK VCC = max. VIN = 2.7V VCC = max. VIN = 5.25V IIL Low-Level Input Current VCC = max. VIN = 0.5V IOS Short Circuit Output Current VCC = max. VOUT = 0. (One output at a time) I CCH High-Level Supply Current VCC = max. VIN = OPEN I CCL Low-Level Supply Current VCC = max. VIN = 0 TRO Output Rise Time Td 500 nS (0.75 to 2.4 Volts) NH Fanout High-Level Output VCC = max. VOH = 2.7V NL Fanout Low-Level Output VCC = max. VOL = 0.5V High-Level Output Voltage Low-Level Output Voltage Input Clamp Voltage High-Level Input Current Min Max Unit 2.7 0.5 -1.2V 50 1.0 -2 -100 V V V A mA mA mA Schematic 1 VCC 3 4 5 6 OUTPUT -40 INPUT 2 115 mA 115 mA 4 nS 20 TTL LOAD 10 TTL LOAD 7 GROUND Recommended Operating Conditions VCC VIH VIL IIK IOH IOL PW* d* TA Supply Voltage High-Level Input Voltage Low-Level Input Voltage Input Clamp Current High-Level Output Current Low-Level Output Current Pulse Width of Total Delay Duty Cycle Operating Free-Air Temperature Package Dimensions Min 4.75 2.0 Max 5.25 0.8 -18 -1.0 20 Unit V V V mA mA mA % % C 40 0 40 +70 .820 Max. PCA EPA1190-4 Date Code .020 Min. .100 Min. .200 Max. .350 Max. *These two values are inter-dependent. .010 Typ. .022 Typ. Input Pulse Test Conditions @ 25 C EIN PW TRI PRR VCC Pulse Input Voltage Pulse Width % of Total Delay Pulse Rise Time (0.75 - 2.4 Volts) Pulse Repetition Rate @ Td 200 nS Pulse Repetition Rate @ Td > 200 nS Supply Voltage 3.2 110 2.0 1.0 100 5.0 Unit Volts % nS MHz KHz Volts .020 Typ. .100 Typ. DSA1190 Rev. A 2/5/96 QAF-CSO1 Rev. B 8/25/94 Unless Otherwise Noted Dimensions in Inches Tolerances: Fractional = 1/32 .XX = .030 .XXX = .010 ELECTRONICS INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 TEL: (818) 892-0761 FAX: (818) 894-5791 |
Price & Availability of EPA1190-60
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |